Front and Rear EXtended 2inch Lift Combo Kits Fixs Fixs Ranger PX BT60 2012

Item Descriptions:

Extended Shackles: 

- Top quality extended 2inch 51mm BLUE Anti shock shackles..

- It will a much smooth ride on or off road as the shackles are able to move with the leaf spring giving a much more linear stress reduced     

suspension action..

 Front Aluminium 35MM Shock Spacer

- These spacers are 35mm thick and will lift the front of your Ranger PX MAZDA BT60 XL 2012 ONWARDS

around 2.5-2.8"inch.

- The spacers pictured are thicker for a bigger lift. The 35mm spacers fit on top of your strut top using the original studs and nuts. No studs of nuts are supplies with this kit as they are not needed.

- It is a simple job to install with basic hand tools. 

- You can use these with your standard suspension or with aftermarket suspension to help level out the typical nose down appearance that the  Ranger PX Mazda BT60 XL 2012 Series have.

The lift spacer is NOT a 1:1 ratio - Meaning that the lift height achieved is much greater than the actual thickness of the spacer.       

The reason is that the  lower control arm counds the amount of lift due to its angle and length.

Item  Sold :

1 pairs front 35mm shock spacer and

1 pairs Rear anti shock extended roughly 40-45mm shackles

L-UA

Packing Size : 23 x 19 x 19cm

Packing Size : 10KG