Centre Bearing Spacer Kit Fits For Ford Ranger PX-PXII Mazda BT-50 2011-2020

Description

• The Ranger/BT50 centre bearing spacers are applied to the u shaped cage that holds the centre bearing into position, and effectively lowers the cage, and centre bearing, down to take the angle out of the pinion. The kit is supplied complete with 12 x 3.9mm spacer washers, to suit for the spacing requirement indentified (from 3.9mm to 23.7mm), depending upon your lift.
• The Ranger / BT50 centre bearing spacers are applied to the U shaped cage that holds the centre bearing into position, and effectively lowers the cage, and the centre bearing down, to take the angle out of the pinion.
• The kit is supplied complete with 12x 3.9mm spacer washers, to suit for the spacing requirement identified (from 3.9mm to 23.7mm) depending upon your lift.
• All lift kits for the Ford Ranger PX & Mazda BT50 should include a centre bearing spacer kit to avoid driveline vibration that can be causéd after installation of lift kits.

Features:

• Use to rectify drive line vibration in rear tailshaft
• This will reduce the severity of the Drive Shaft Angle due to the
• Increase in Suspension Ride Height.
• This will Dramatically Reduce Drive Line Vibration.