1.5" Strut Spacer Rear Lift Kit UBolt Adapter For Mazda BT50 BT-50 UP 2011-15

Product Overview :

Front Aluminium 25 mm Shock Spacer :

- These spacers are 25 mm thick and will lift the front of your car around 1.5" inch ( 35-38 mm ).

- The spacers pictured are thicker for a bigger lift. The 25 mm spacers fit on top of your strut top using the original studs and nuts. No studs of nuts are supplies with this kit as they are not needed.

- The lift spacer is NOT a 1:1 ratio - Meaning that the lift height achieved is much greater than the actual thickness of the spacer. The reason is that the lower control arm compounds the amount of lift due to its angle and length.

Features :

- 100% Brand New

- Will provide approximately Front 1.5" inch ( 35-38 mm ) and Rear 2" inch ( 45-48 mm ) of lift.

- You can use these with your standard suspension or with aftermarket suspension to help level out the typical nose down appearance that the 4x4 Vehicles have.

Notes :

- Not included Installation Guide or Manual

- Professional Installation is Recommended

- Only Suitable For Model that Leaf Spring Installed above axle, Please make sure your vehicle Leaf Spring is installed above axle ( please refer to pic )

- Some model year in some countries may not be the same as described. ( Please do contact us to make sure is it fit your car )

- Fit For 4WD Model Only

- Does Not Fit For US Spec Ranger

Application :

- 2012 - Present  Ranger T6 PX [ XL / XLS / XLT / WILDTRAK ]

- 2011 - 2015 Mazda BT-50 [ UP ]

*** Please make sure it fit your car before purchase ***

Package Content :

- 2 x 25mm Shock Spacers

- 2 x Rear Block Adapter

- 4 x U-Bolts

Packing Size : 30 x 25 x 8 cm

Packing Weight : 5.5 kg